ARCH 653 Project 2 1. Objective This project aims to perform daylighting analyses for Lotte World Tower spaces. The change in parameters of the building facade can result in different daylighting effects. LEED version 4 defines that sDA (spatial daylight autonomy) represents how much of space receives sufficient daylight and it should be over 75. So, this project changes the width of curtain panel windows and analyzes the following daylight factors. 2. Facade Design The curtain panel chosen for this project is shown in the below figure. It has shading walls on each side. The width of the shading walls can be changed parametrically. The middle part is composed of windows. The panel was then placed on the facade of the model. 3. Dynamo - Daylight Analysis The project used the Honeybee tool to analyze daylighting. For the analysis, Revit 2019 and Dynamo version 1.3.3 or lower are required since the tool hasn't been updated yet for Revit 2020 and Dynamo 2.0. The t...
ARCH 653 & 655 Project